font size

STATE OF Derzhgirtekhnaglyadu of the Russian Federation dated 11-06-2003 92 ON THE APPROVAL OF INSTRUCTIONS FOR VISUAL AND VIMIRULATIONAL CONTROL (2020) Relevant in 2018

ACT OF VISUAL I/ABO VIMIRUVAL CONTROL OF THE FLUIDITY OF WELDING JOINTS DURING THE BURNING PROCESS

______________________ (organization) ACT N _____ for __________ visual and / or vimiruvalny control of the quality of the welded seams in the process of brewing __________________________________________________________________ (name of the name and number of the zadnannya) тавро _____________________ з'єднання _______ (див. зварювальний формуляр), тип (типи) з'єднань виконаного _____________________________________________________ вказати спосіб зварювання та положення відповідно до вимог технології зварювання __________________ __________________________________________________________________ вказати шифр технології та недоступного для контролю вимірювальному контролі з оцінкою якості за нормами _________________________________ для category __________________________________________________________________ (code or name of ND) is inserted, what is entered I was recognized by the adjuncts and vіdpovіdaє vimogam ________________________________________ (specify ND or design documentation) Vikonav control: _______________________________________________ Rivnіfіfіkаtsії, Kerіvnik robіt z vіzualіvіruvalnogo control: _________________________________________________________ Name, іnіtsіali, signature Note. The act is formed on the skin construction (z'ednannya or group of plants), subject to control of the process of zvaryuvannya. Vymogi before issuance of the "Protocol of approval of _____________" (virib) The protocol of remembrance of the virobu (table) is guilty of revenge on the factual remembrance of the virobu, vikonannі at the singing resections, as they are asked by the "Scheme of vimiriv _____________". The form of the Protocol (virib) is designated for design and technological preparation of control work. The protocol is signed by individuals, who victoriously victorious, that kerіvnik works for visual and viviruval control from the appointed privileges and initials. Vymogi to zmistu "Journal of the appearance of robot and registration of the results of visual and vimiruval control" The results of product control, virobiv and objects are recorded in the "Journal of the form of robot and registration of the results of visual and vimirovanal control", in such a way: 1) ) controlled object, its number chi cipher; 2) spreading and, if necessary, expanding the controlled plots on the object of control; 3) mind the control; 4) sample-control document, number; 5) method of vimiruvalny control and zastosovaniya accessories (instruments); 6) the brand and batch number of the object's material control, as well as the designation of the standard or technical minds for the material and the number of the object's chair (remain only for details and storage units); 7) the main characteristics of defects that were revealed under the control (shape, size, shaping or orientation along the base axes or surface control); 8) naming or code ND, zgіdno z kakoyu vikonanu assessment of the quality; 9) assessment of the results of control; 10) date control. Note. Допускається застосування замість наведених інших форм документів, що розробляються організацією відповідно до вимог чинної нормативно-технічної документації, які забезпечують ідентифікацію та простежуваність деталей, вузлів, виробів у процесі виготовлення (монтажу, ремонту), фіксацію контрольованих параметрів, обсягів та методів контролю, оформлення звітної and oblіkovoї documentation from visual and vimіryuvalnogo control.

Addendum F to Instructions for visual and vimiruval control (recommendations)

_____________________________ (organization) ACT No. _____ for ____________ visual and visual control Inspection of faults is determined by ___________________________________________ name and/or code of technical documentation 2. During the control, the onset of defects and ___________________________ characteristics of defects (form, _____________________________________________________________________________ rozmіri, roztashuvannya and/or orientation for specific objects) ________________________________________________ 3. Visnovo for the results of visual and vimiruval control ________________________________________________________________________ ____________________________________________________________ ________________________________________________________________________ qualification certificate Kerіvnik works from visual and vimiruval control ____________________________________________

Explanation before issuing the "Act of visual and / or vimiruval control"

1. In paragraph 1, the type of control is indicated - visual, visual, or visual-visual, as well as the name of the controlled object: product, preparation, detail, design, preparation of the edge of the part, preparation of the 'day, selection of a defective plant in the material and / or the factory, type, as well as the name and / or codes of the verification document (Incoming control program, Card or control scheme, Technological control card, Card or operational control scheme) and normative document that regulates the ability to assess the quality of the inspected object during visual and vimiruvalny control.

When controlling materials (products, blanks, forgings) in paragraph 1, the brand of the material, size (diameter, tovshchina) and batch number are assigned.

When checking details and folding units, item 1 specifies the number of the seat, the number, the brand of the material (only for parts), and the code is valid for the seat (standard).

When controlling the preparation of the edges of the parts, the folding of the z'ednannya of the zvaryuvannya and the finished zvarnyh z'ednanny in item 1, the numbers of the z'єdnanny zgіdno zvaruvalny form or the scheme of the roztashuvannya zvarnyh z'єdn, as well as the rozmіri of the parts of the z'єdnânnya (commodity) , brand of material and method of brewing (for ready-made brews) production).

When checking the selection of defective parts, the name, brand of the material and the size of the object (diameter, torso), as well as the design of the selection are indicated.

2. When clause 2 of the Act is completed, in the new one, all steps are assigned to the norms of ND, revealed during the control of specific objects (dilnitsa, z'edna and іn.) in connection with up to their numbers in the design form, the scheme of distribution or the scheme of control .

In quiet situations, if the object of control is viable for ND, in the act there will be an indication - "defects in the day". When you specify the numbers of specific objects, it is possible to point to more documents.

Note. It is allowed to issue one act per batch of the same type of beverage products, blanks, parts, structures.

______________________ (organization)

p align="justify"> Control of welded seams is a necessary part of the admission of various structures to operation. The methods and results of the re-verification of the diy are reviewed by a special act.

FILES

How to carry out re-checking of welded seams

In fact, for further sewing, various methods can be used, for example, ultrasonic, magnetic, chemical, capillary and other high-tech methods. Prote classic, up-to-date and up-to-date – a great visual look. Yogo meta: perekonatisya in what is a seam of yakіsny, good boils, do not let pіdrіzіv, naplіvіv, propalіv, supra-worldly lusciousness and other waters. The advantages of this kind of achievement are quite obvious: because of the great vitrates, at their own reach and to get informative, but at the same time to reveal their own minuses: subjective obstezhennia, low reliability, ability to reach only a visible part of the seam.

A visual look can be carried out like an unbroken eye (sound, like to go about the great seams, to look at each other kindly), and for the help of other things, such as lenses, microscopy, endoscopy, flaw detection, etc.

The stench is used to reveal the smallest attachment defects, which can be easily seen with a simple look at the outer side of the welded seam (for example, microscopic cracks, cracks, cracks, cracks, thinning). If you need to use it, if it is recognized only for vikoristannya in laboratories and tі, yakі you can stop at the fields. The rest of the buildings should be kept vigilant, be it the temperature of the weather (including those that may increase the coefficient of radiation, chemical, bacteriological, and unsafe for people).

Newly needed re-verification of the welded seam

The purpose of such a deep cladding is entirely obvious: as a rule, be it a design, with some kind of victorious brewing, recognized for vitrimuvannya singing, to achieve a serious ambition (especially the cost of budding spores). I be-like vidhilennya vіd tehnіchnіchnyh norms, scho vіdbulosya at їх prepared, threaten tim, scho design not vytrimaєі zlamaєєєєє, scho in his line can bring not only up to financial costs, and th to threaten the life and health of people.

Most of the seams are not only altered after the construction has been prepared, but also in the process of exploitation - it is due to them that stinks can cause corrosion and other unacceptable inflows. Also, regular revisions are necessary when welding a few balls onto a worn structure, with which the leather of the ball is controlled, the neck of the seam, the thickness of the base metal are checked, and the price of data is set from the established standard for the size of the worker from the urakhvantage of it.

The frequency of revisions is determined by the norms of legislation, and navit by internal regulatory legal acts of the enterprise.

Timely and visually look around to give the opportunity to reveal the ruined seam of the yakomog earlier, and also to understand the reason and know the way for their adoption.

Who zdіysnyuє look and fold the act

The brewer himself, like a yogi vikonav, must rob the pochatkov’s reverberation of the quality of the seam. Farther control is exercised by other practitioners: for example, the head of a department, an engineer, then. It is important that these individuals lacked the necessary knowledge of the technique of visual inspection of welded seams, and were also provided with the necessary accessories and accessories. So the stench is the fault of the mother of the manifestation, as to formulate an act of visual inspection of the seams.

Act format

Today, the single standard of the act is daily, which means that yoga can be done at a pretty sight. However, as in the middle of the organization there is a template of the document, some kind of fragmentation and hardening by kerіvnitstvom, then the following is the best way. Good, as the format of the act will be specified in the public policy of business.

Features of the execution of the act of visual inspection of the seams

While the execution of the act is also impossible to hang out, so you can write it by hand or type it on a computer, for a new document, a form with a company logo and requisites and a great piece of paper. One: as soon as the electronic form was broken up, it was necessary to send it out for affixing to the new signatures of the vouchers. The act of fighting in one original copy, which obov'yazkovo is given a number.

Registration and registration of the act

Vіdomosti about the act of obligatory guilt but entered into a special journal form, in order to obtain sufficient information about the yogic number and date of creation. The period of taking the prepared act is determined by the administration of the enterprise individually, according to the norms established by the legislation, and navit internal needs of the enterprise.

The act is to be saved in the okremіy paptsі or structural pіdrozdіlі, in yakom vіn formations, or in the archives of the organization.

If you need to make an act of looking at the front seams, which you didn’t do before, hurry up and read the comments down to the bottom - they will help you complete the necessary document without pardons and ambiguities.

1. We must first be included in the act of name of enterprise, then give the document a number, indicate the date and place of its creation.
2. They gave to write in the act of planting PIB workers, as if they carried out an inspection of the welded seam (as representatives of various enterprises, indicate the name of the skin one).
3. Then go to the main part: note the information about the vikonavtsya work: the settlement, PIB, then enter here the data about the stitches, how they were trimmed: the current number, steel grade and other identifying values.
4. Tell us about the accessories, how to change the time of rechecking, all the methods, their results, and also give recommendations on other additional methods of cooling.
5. For example, about obov'yazkovo, add in-line control, put signatures.

ACT No. _____ type of __________ visual and / or vimiruvalny control of the quality of welded seams in the process of welding

________________________________________________________________________ (name of the letter and number of the order)

1. This act certifies the fact of vikonnanny zvarnik ______________________________________________________________________ P.І.B., brand

Z'ednannya _________ (div. Zvaryuvalny form), type (tepi)

Vikonanogo _________________________________________________________ indicate the method of zvaryuvannya that position

Vіdpovіdno to vymog technologii ї zvaryuvannya ______________________ ____________________________________________________________________________ specify code of technology

І inaccessible for control __________________________________________

Design documentation

2. With ball-based visual and vibratory control with an assessment of the density according to the norms _____________________________________ for category ____________________________________________________________________________ (code or name of ND)

It has been established that the designation is recognized by the adjuncts and the support of the authorities ________________________________________________________________ (specify RD or design documentation)

Control of the viscons: _________________________________________________ The date of qualification, Award, initials, signature No. qualification certificate

Kerіvnik works from visual and vimіryuvalnogo control: ____________________________________________________________ Award, initials, signature

Note. The act is formed on the skin construction (z'ednannya or the group of plants), subject to control of the process of zvaryuvannya.

Wimogi until the execution of the "Protocol of reconciliation _____________" (virib)

The protocol of reconciliation is drawn up more than once, if it is assigned to the RD and PKD for the control of virib. The protocol of remembrance of the virus (table) is guilty of revenge on the factual remembrance of the virus, vikonannі in the singing of the cuts, as they are asked by the "Scheme of vimiriv ____________". Form to the Protocol of reconciliation is determined (virib)

Under the hour of design and technological preparation of control robots. The protocol is signed by the persons who have victoriously victorious, that kerіvnik works for visual and vimiruval control from the appointed privileges and initials.

Wimogi to zmіstu "Journal of the appearance of robots

and registration of the results of the visual

and vimiruvalnogo control"

The results of product control, virobiv and ob'ektiv are recorded in the "Journal of the appearance of work and registration of the results of visual and vimiruvalnogo control", in which state:

1) the name of the type (type) of the controlled object, its number, cipher;

2) spreading and, if necessary, expanding the controlled plots on the object of control;

3) mind the control;

4) sample-control document, number;

5) method of vimiruvalny control and zastosovaniya accessories (instruments);

6) the brand and batch number of the object's material control, as well as the designation of the standard or technical minds for the material and the number of the object's chair (remain only for details and storage units);

7) the main characteristics of defects that were revealed under the control (shape, size, shaping or orientation along the base axes or surface control);

8) naming or code ND, zgіdno z kakoyu vikonanu assessment of the quality;

9) assessment of the results of control;

10) date control.

Note. Допускається застосування замість наведених інших форм документів, що розробляються організацією відповідно до вимог чинної нормативно-технічної документації, які забезпечують ідентифікацію та простежуваність деталей, вузлів, виробів у процесі виготовлення (монтажу, ремонту), фіксацію контрольованих параметрів, обсягів та методів контролю, оформлення звітної and oblіkovoї documentation from visual and vimіryuvalnogo control.

(Organization)

ACT No. _______ type _____________
visual and visual control

1. Vіdpovіdno before the order-application (application) No. __________________ vikonano

visual and vimiruvalny control Zvarnogo stick z'ednannya
Specify the type of control (visual, visual)

pipes with a diameter of 76 mm ________________________________________________________
naming that rozmіri, controlled object,

____________________________________________________________________________
cipher of documentation, specifications, armchair, melting (batch), number of control object

zvarnik __________ Ivanovim I.I. __________ Brand No. ____
name of my father

Vikonano control zgidno _ technological control card No. ____, RD 03-606-03 __
name and/or cipher of technical documentation

2. Under the control, the following defects were revealed:

_Re-adjustment of the seam reinforcement - 6 mm (67), understating the width of the seam - 4.0 mm (163), __
characteristics of defects (shape,

_1.0х5.0 (50), pіdrіz 0.5х7.0 (149), surface pore 0.8 (100) ____________________
rozmіri, roztashuvannya and/or orientation for specific objects)

____________________________________________________________________________

3. Visnovok for the results of visual and vitriol control:

_Zvarniy seam does not vydpovida vymogam NTD and vyznaniy impermissible ________________

____________________________________________________________________________

Wicon control:

_______________________________________________________ _( _________________) _
qualification certificate, No. of qualification certificate P.І.B.

Kerivnik robit s VIK: ______________________________ _ ( _________________) _
P.I.B.