Childish booth. hut

Do not know how to arrange a play chicken for your children and friends? Vtrachaetsya, why start? In our article, all the main types of constructions of smokehouses are reviewed, and reports are made for installation, which allow them to easily fit into these tasks.

Mustaches in childhood were fortified with pillows and curtains. Ale and spores stood in the strength of sprat years. A child's playing chicken is a richly small construction, a child can grow, develop and grow like a booth, and on the street.

Basic security measures

The fathers are guilty of podbati about those, so that the weekday for Igor buv is no less than quiet, but still safe. If a tree is vicorated for the frame, then the bars need to be sanded and covered with farboa or varnish, so that the child does not drive the rolling pin. Mustaches are also able to be attached to children's eyes and hands. The construction is not guilty of buti gostrikh kutіv and solid materials (stone, metal).

In the midst of the dispute, there may be a sufficient amount of respite. Like hens of fabric - it is necessary to work vikna, like a house covered with needles or spruce branches - obov'yazkovі enlightenment. For the same reason, you can’t cheat chickens with spitting.

It is necessary to think about the correctness of roasting the kuren. Do not put yoga on stretches, far from mature and in the sun. A number of spores are not guilty of potentially unsafe objects for children in that area.

Dvoskhili fabric chicken

This is the simplest construction of the hut. For the well-known little children, you can arrange two chickens by simply throwing a towel over a stretched skein. For three older lads, chickens of a good design on a wooden frame.

Necessary materials for the frame:

Chotiri pine bars 25x50 mm, length 1.2 m;
round wooden shearing with a diameter of 20 mm, headband 1.2 m;
drill with a downy drill with a diameter of 20 mm;
olive;
roulette.

Materials and tools for awning:

fabric 1.2 x2, 2 m;
sewing machine;
white gumka;
threads.

Work order:

In the upper edge of the skin s chotyroh bruskov vіdmirati 15 cm.
Now it is necessary to drill a hole with a diameter of 20 mm with a drill.
When two bars are confused, it is necessary to cross over, so open them up.
Now it is necessary to stitch a round shear through the opening. The zcheplennya can be finished with a bolt for superficial fixation.
Another end of the shearing slipped open two bars, which were left out. The frame is ready.
The fabric for the awning needs to be turned 1 cm around the perimeter with a straight stitch line. Necessary expansion of the awning 1.1 x2, 1 m.
Vіd gumka bіlizni vіdrіzati chotiri shmatochki dozhina 10-12 cm.
From the skin gum, make a loop and sew it at the kutah of the awning.
Now it’s only left to throw the fabric over the crossbar of the frame and fasten it on the legs for the help of gum loops.

Budan of this design can be adjusted in height and width, it is easy to pick and choose one person. Yet another handy team, who borrows a few months from a chosen one.

Children's chicken "Wigwam"

The frame for the "tepee" can be double wooden poles, bamboo strings or PVC pipes. The walls can be fabricated - such a chicken can be selected and saved for a long time. A disposable chicken at the fox or at the dacha is vkryvayut with spruce branches, but it’s also not safe.

To arrange a "tepee" with fabrics, you need:

4 PVC pipes with a diameter of 20 mm, 1.7 m;
8 kovpachkiv for pipes;
reel or lace for vzuttya;
5 m of heavy fabric 1.4 m wide;
fabric on 1x1.2 m for pipes;
threads.

Robot order

Depending on the plan, it is necessary to cut the fabric. All sizes include 1 cm for allowances.
The upper part of the front wall needs to be lined with a 12.7 cm long bottom.
Now you can sew on the parts of the front wall at once.
Now you need to lift the upper edges of all three sides. Level them in height, lay them down so that the height of the end walls of the sidewalls would match the height of the finished front wall.
It is necessary to fold the fabric for the fold at your own loop-case for the trumpet. This sash is laid between the outer walls of the "tepee", and sewn at once. Those same need to grow with smaller folds. As a result, the awning is ready.
In the upper edge of the skin tube, it is necessary to enter 10 cm and drill a small hole.
Krіz open the lace stretching out, which mіtsno pov'yazuє all the trumpets at once. At this stage, an awning is placed on the frame.
The ends of the pipes are curled up with tongs, and that's all - the "teep" is ready!

Budan iz gіlok and living roslin

In order to build an original hen from living roslins at the dacha, it is only necessary to drive high poles into the ground along the stake - there will be a frame. Plant curly growths along the perimeter of the frame, for example, clematis, Ipomoea or grapes. A clear shortfall of such a kuren is a long time for the growth of roslin, so for children such a budinochok will not be called.

You can better sporudit hens with verbalose, for which you need a lot of old chicks (for more, it’s a great budinochok). Just drive the heads into the ground, and twist the tops tightly. To make the walls stronger, you can cover the vine with spruce branches or simple straw.

Namet with a frame made of PVC pipes

The outline of such a construction occupies a large area, or it can accommodate the whole family. It’s easy, it’s easy to install, and it takes a little time for the chosen one.

Required tools and materials for the awning:

sewing machine;
wire fabric 2x3, 5 m;
threads;
roulette;
olive;
scissors;
hairpins.

For the framework, PVC pipes with a diameter of 20 mm and plastic spigots are used.

Framework tools:

A - windmill pipe 146 cm, 3 pcs.;
B - a pipe with a length of 152.5 cm, 2 pcs.;
З - a pipe with a length of 122 cm, 2 pcs.;
D - a pipe with a length of 64 cm, 4 pcs.;
E - windpipe 80 cm, 4 pcs.;
z'ednuvach for pipes with a diameter of 20 mm; 4 things.;
PVC knee at 45 degrees with a diameter of 20 mm, 4 pcs.;
T-z'ednuvach for pipes with a diameter of 20 mm; 4 things.;
potryny plastic tube for pipes, 6 pcs.;
PVC-fitting from standard cuts, 6 pcs.

Preparation of cover for basting:

From fabrics of virіzati shmatok 1.6 x3 m, add 1 cm along the edges.
Three smugs with a width of 10 cm and a length of 140 cm are left in the fabric.
The other sides of the smog are folded up by 1 cm and smoothed over with a dust.
From the back of the main coat to the short side A, sew one edge of the smuga. The other edge is sewn on, having entered 4 cm from the first. Those same need to grow with a thick smug, as you know from the protilazhny side of the frame.
To know the middle of the awning, it is necessary to fold the canvas navpil. In the line of the chin, enter 2 cm from the skin beak and mark with olive. Here you need to sew a third smuga.

Folding the frame:

For the cob, it is necessary to creak at once a number and a T-like tee through a z'ednuvach for pipes.
Now we can work six cuts at 90 degrees: I’ll make two for the bottom and two for the forging. For any requirement, fasten the fitting on the upper part of the potry coil.
The folding of the frame was further similar to the folding of a child designer. The front and back walls are picked up on the back, then the stench is crossed between them.
The final touch is the installation of the outline at once from the cover.

An older child can be easily lulled to work by smoking. Small children are also simply occupied: it’s enough to give them a bright farby, let them fill up with different colors of dolons on the future cover of a house. Your child will be in the grip of a smoke, selected and embellished for his fate.

Nataliya Mamonova, rmnt.ru