Inexpensive and durable bathroom renovation with plastic panels: photo design options
The old Russian apartments have a small area of the bathroom. In order to create comfortable and functional materials, it is necessary to use appropriate materials. Viide repair is not expensive bathroom renovation with plastic panels. A photo At the same time, it will show how sanvuzol can become after the installation of such inexpensive and functional facing coverings.
Facing at the bathroom may help to improve hygiene and comfort, necessary for the adoption of water procedures. Check it out:
- water resistance;
- durability;
- practicality;
- resistance to mechanical infusion;
- unsightly to the point;
- design diversity.
Even though the material does not look like an object for a bathroom, it is necessary to remember that it is possible to lay down without intermediary due to the completion of the sequence of repair steps and the technologies recommended by the specialist.
Why start?
Before the cob of repair work at the bathroom, it is necessary to carry out a forward glance, paying attention to:
- rіven vologostі;
- pіdbіr koloru zvnіshny pokrittya for visual zbіlshennya small area;
- the technology of reinforcement, so as to allow sparingly stained stained squares of the premises.
The first step is to install new fittings for the bathroom, then clean both the old lining and the dirt.
Please! Repairs are due to be repaired by sі stіn. Only after the completion of the laying of tiles, or the installation of piece stone or plastic, proceed to the improvement of the stele. As if the front surface was chosen farbovannya, then start in the right direction next to the wall.
Vidi ozdoblennya
To create a beautiful surface, vicorist:
- ceramic tiles;
- water-resistant drywall;
- vologostyka farba;
- piece marmur;
- plastic panels.
Vіd usіh varіchenih virobіv plastic vіdrіznjaє varіznjaє low varіst and ease of installation. To help with the help of a small rozmіru zdіysnyuєtsya yakіsny repair іz mіnіmalnymi investіnnyami. A great palette of colors and images allow you to create modern interiors.
Marine interior, help of PVC materials
Polymer modules are cheap, their color variations vary, and installation does not depend on professional skills. A small tovshchina allows you to economically stain the square of a small bathroom.
It is easy to see behind such a decor, the wines are not afraid of increased moisture and allow you to create different style solutions that visually increase the size of the bathroom. Leaves with polymer are safe and do not see the middle of the bruised speech. The outer side can be resistant to puddle and acidic warehouses, so it is easy to clean the vines from the dampness.
See PVC panels and tipi laying
Three types of PVC processing are presented on the wake-up market:
- lath slats of a dial-up type, which make lining. The stench vikoristovuyutsya for the creation of zovnіshnoї surfacing. For the installation, it is necessary to install special fastening brackets. Polymer can be laid vertically and horizontally. Vybіr stale vіd repair tasks. For visual expansion of the space, horizontal installation is used, in order to visually lift it up, then carry out vertical installation;
- planks that imitate ceramic tiles. Lay this type of processing with the river method in a mosaic way, or on the square of the shah's cell;
- leaf type. Zovni vіn guess plywood with decorative decorations on the outside side. Yogo krіplyat on rіdkі tsvyakhi, zazdalegіd vykonavshi pіdgotovchі robots. This type of protection allows you to protect the corisna area and does not require special qualifications.
If you want to renovate the sanitary unit's place quickly and with minimal investments, use plastic decorative materials for the outer ball. Correctly choosing the color solution and the way of laying it is possible to remake an unshowy bathtub without special financial and labor costs.
Lining with polymer can be a great number of pluses, which allow it to compete with traditional methods of repairing a bathroom. Virobniki promote a wide color palette, so you can choose different colors for the chosen color design.
It is necessary to remember! When buying PVC sheets, it is necessary to carefully check them for the presence of defects. The ominous ball is guilty of being equal and smooth, zabarvlennya on the new may be equal.
Installation methods
Installation of rails made of plastic is breathtaking in simplicity and accessibility. Such a work is to be done by a stalker-pochatkіvets. There are two ways of fixing: on the frame and on the rare flowers.
Gluing technology
Vicoristannya skeleton to go there, where it is necessary to attach the trumpet. Ale requires remembrance that in this occasion you happen to sacrifice the brown area.
When glued to the material, the amount of space is minimal. Ale for fixing leaves on glue, it is necessary to prepare the walls in advance, having sunk unevenness and cracks. Otherwise, the decorative ball is not suitable and uneven.
How to prepare an appointment
When installing a frame for fixing sheets, it is necessary to re-remove the old farb or tile and repair the walls at the profile installation sites. When gluing the oval decorative ball, it is necessary to create a perfectly even surface over the entire area of the wall near the bathroom.
The walls and the stele are guilty but dry and treated with a special antifungal treatment. Tse insure against the appearance of flowers and fungi during the hour of the restoration of the bathroom after repair.
Important! If the method of installation is slatted, then there is no need to take wooden slats. It is impossible to reach the full tightness of the plastic lining. Therefore, we will drink water at the inner space and pour it on wooden bars. It’s better to win the profiles with the plasticity of Vonya not to take the vologist and save the first ovnishnіy look.
Mustache slats for the frame may lie at the same plane. Between the wall and the wall facing, it is necessary to cover a small space of 2-3 mm for ventilation in the interior of the wall and wall.
It is necessary that the elements of the frame were found one type of one on the stand 40-50 cm on the walls and 30-40 cm on the stele. Laths are installed at straight perpendicular laying of PVC sheets.
Please! When assembling a smooth surface with a polymer, it is better to choose vertical rotting. This does not only ensure the visual improvement of the height of the stele, but it also allows you to lead the vologer out of the intermediary space. At the vertical lining, the droplets go down and do not get stuck on the surface of the wall, or on the back side of the PVC lining.
The fastening of polymer sheets on the grid is carried out after cutting the plastic sheet. Robiti tse sled with a special hacksaw with loose teeth for cutting a smooth edge. For rіzannya, you need to get lower from the gostrim forest. Knives are victorious for cutting horst parts, like on the end side of such material.
Even before the cob of assembly work, it is necessary to choose the right cut. At the most important places, a whole PVC module is installed to create a pleasant, splendid look. In front of the front kut it is necessary to go straight to the city, where the police will be creeping, drying for towels or other accessories. Repair the reinforcement from the starting kut, which is well seen in the host, and finish with the final kut, the panels will be broken, which form the expanse beyond the world.
During the installation, the front ball is attached to the polymer behind the additional grooves on the end sides. It is allowed to use self-tightening or coloring at the place of fastening of sheets to plastic before reshetuvannya. When installing the rest of the decorative edging, it is necessary to remember about those that can be creased to the final kuta by the wide side of the groove.
Gluing technology
As glue is fixed in the vicor, it is necessary to remember that it is impossible to break the laying of the electrical wiring and the water supply.
When vikoristannі glue or rіdkih tsvyakhіv sіd relno to prepare the surface for installation. Vaughn can be even, clean and dry. As the dismantling of the old structures was carried out, it would be possible to clean the old saw and the greasy flames.
For gluing plastic strips, it is necessary to use special adhesive warehouses of the "Ridki flowers" type. It is not possible to stop gluing speeches prepared on the basis of organic retailers. Otherwise, the decorative ball is irrevocably closed.
Before gluing, the inner block of the polymer module is smeared with glue. When applying the mask that glues, it is necessary to stitch behind it, so that there is not a lot of glue around the edges. Otherwise, with the onslaught of wines, the name is penetrated and smeared on the front surface of the outer ball.
The gluing method in the early stages allows for the growth of the attachment of engineering communications. For this, the decorative ball is simply glued onto the frame, installed at the places of laying pipes or electrics.
When vikoristanni gluing, fill in the gaps between the veneers at the places of the stucco with a flat one and a stele. It is necessary for ventilation of the space taken under them. For more technological recommendations, upgrade the bathtub for additional plastic material with clumsy wet sucillas.
