Renovation of the bathroom with plastic panels

Renovating the bathroom with plastic panels is a very popular option that allows you to change the repair window and not to beat the expensive services of specialists. The majestic gamut of different designs and textures allows you to reach different solutions, like a rich rock to embellish your bath.

Plastic panels for the bathroom are a wonderful option that allows you to remake the interior and significantly protect it in the same way with a small tile tile, which is not cheap to finish. At this article, we have given report instructions on how to repair the bathroom with panels. In this rank, you can repair the vikonati yourself, without hiring specialists.

The bathroom of the room is a place to do “capriciousness” in terms of refinishing, which is due to nutrition, as it is right to start a new repair. Through part of the temperature difference and the increase in moisture, it is necessary to pick up the glass to similar negative inflows of the material. In addition, the quitting is due to the need for hygienic help, which is necessary, to cover the walls easily.

To all of them, we can use traditional ceramic tiles, but there are still some shortcomings:

Folding installation, which requires carefulness and not a little patience. Laying tiles takes a lot of strength at the same time.
It is possible to take on a job independently only for a sufficient knowledge in tile robots.
Dosit high vartist. The tile is an expensive building material, although it is long-lasting, but at the same time, it has a little bit of wear and tear. Laying tiles - the process of folding, and trusting yoga, like the design of a bathroom, is better for professionals.

As well as your meta - to repair the bathroom of the room cheaply and quickly, to put respect on the plastic panels, as for their operational qualities, the tiles are practically nothing. Therefore, the walls of the bathroom are covered with plastic panels even more richly, which is one of the most popular types of finishing.

To overlay PVC panels:

Water resistance, resistance to temperature drops;
Mіtsnіst to rіznyh ushkodzhen;
A great choice of textures and colors - є navit tile in the bathrooms of plastic, which imitates the traditional;
Simple installation;
Environmental safety;
Low price.

You can find a lot of photos of bathroom wall panels on the Internet and reconcile, which is beautiful and neat looking.

Selection of panels

To the choice of building materials for the walls, it is necessary to match with the necessary strength.

Ozdoblyuvalny panels for a bathroom of a room are absolutely equal, without "whil". Only in this time the walls of the bathroom look beautiful.
It is also necessary to reconsider, so that the filling of all panels was equal. It is best to buy material from a single batch number. Otherwise, it may turn out that the panels are being dried, and your bathtub of the room made of plastic panels does not look too beautiful.

Renovation of walls with plastic panels

As already mentioned above, the design of the bathroom with plastic panels is carried out more simply, lower laying tiles, especially for the design of the walls.

Otzhe, how to complete a bathroom with plastic panels?

Installation of plastic panels on the wall can be done in two ways:

For help, reshetuvannya, to which then the panels are fastened.
For additional help, glue on the kshtalt "Ridki flowers".

The first way: in the first place, it is not necessary to prepare the walls, but in another way, you can install pipes.

However, choosing this method, it is necessary to ensure that such renovation of the bathroom with plastic panels will cause a significant change in the area of the bathroom. It may be too small, especially if the bathtub is so small.

Another person needs the presence of equal walls at the bathrooms, for that one needs to prepare the work of viriving.

Preparation of walls

As you plan your everyday life, you should take out the walls of the old cover. Clean up bulges and humps and lay in unevenness, it is necessary to turn it off in places, in which slats are attached.

If you stick the panels to the glue, it is necessary to clean the walls well, remove the old covering and resolutely dry.

In any case, it is necessary to fill the walls with an antifungal warehouse for the prevention of flower growth.

Installation of straight bars

If you are planning to design a bathroom with plastic panels, do not varto vicory wood lati. It is impossible to achieve complete tightness between the sticks of the wall panels, and the water, which penetrates under the panel, progressively destroys the structure of the tree.

That's why it's necessary to put plastic profiles in the bathtub cladding.

Installing the slats, respectfully stitch, so that the stench will be rolled out in the same plane.
To improve the ventilation between the panel and the wall, it is necessary to close the gaps 2-3 mm wide, along with the underlays and the stele.
Mіzh suіdnіmi details of the lathing can be left out. When making a wall, it is necessary to add 40-50 cm, when making a steel - 30-40 cm.
Details of reshetuvannya krіplyaetsya up to a straight line of panels perpendicularly. Since the panels are installed vertically (this is the best option for the bathroom), then the grouting can be parallel.

The vertical installation of the panels greatly increases the height of the beds (which is also relevant for typical bathrooms) and is acceptable to the garnier view of the vologist for the rahunka of what the drops, which they drank into the sticks, will sink down, which is impossible with the horizontal position of the panels.

If you are ready to reshetuvannya, you can proceed to the installation of wall panels. It is proponed by deaky korisnі, for the sake of this work, the bathtub with panels with its own hands has long been pleasing to the eye.

When installing plastic panels, more than anything else, there is no overlap, even if the width of the bathroom walls is unlikely to be a multiple of the width of the canvas of one panel. The best way to cut panels is to put a hacksaw with loose teeth.

Handily cut the panels with victories once with two tools - a sharp knife and a hacksaw for metal. Nozhuvanni roblya nadrizi on the ends of the plastic panels (the most common space).

It is important to correctly select the cut, for which you will understand the installation. It is necessary to say that the lining of the bathroom with plastic panels is built in such a way that at the corners, which are thrown into the eyes (in which it is not planned to install heated towel rails and polychoks), the panels are solid, not cut.
For installation, according to all the rules, it is necessary to designate the starting and finishing cuts. Installation of plastic panels near the bathtub is very simple. After that, as the starting cut will be installed, it is necessary to introduce a thin element of the first panel fastening into the groove.
Because of the wide details of the fastening, called by the police masters, the panel is fastened to the grating. Robiti ce sruchnіshe іz zastosuvannyam vikoristannymi tsvyakhіv аbo screws.

At the groove of the first reinforced panel, it is necessary to insert a vuzka of the offensive police, as if to tighten, at one’s back, on armor for help, twisting into a wide police of self-tapping. The installation of the foot plastic panels is just as easy.
The remaining panel with the narrow side of the fastening is inserted into the front groove, and the wide police is inserted into the groove of the remaining node. It is not necessary to fix the PVC panel dodatkovo.

Remember, if the panels are attached with glue, then the electrical wiring is attached and the pipe wiring is not visible.

The wall needs to be cleaned from a wake-up saw, as well as greasy flames and dryness.
For the work, it is necessary to victoriously include special varieties of glue, for example, “rare flowers”. Sticky sums, which include retailers of organic travel, are categorically fenced.
We glue evenly cover the surface of the panel, and then apply it to the wall.
As much as it is necessary to attach pipes, then wall panels can be glued to the back of the wall, and not to the wall itself. In this case, it is necessary to close the gaps for ventilation in the lower part, as well as under the stele.

In this way, cladding the bathroom with plastic panels is a practical and affordable option for finishing. Also, panels can be used to build a bed near the bathroom.