The stele in the kitchen is the best choice

The kitchen is one of the most important places near the booth. Here the gentleman spends most of his time preparing food, after which it is boiled, fat that couple rises to the stele. Therefore, in this situation, it is so important to choose the best materials for bedding. This article will help to analyze the pros and cons of materials that are chosen for the design of the stele, and also suggest that the stele is better than robit in the kitchen.

There was a court stele in the kitchen.

Materials, which are vicorated for the kitchen slab lining, are due to the mother of the penny, the stench is due to moisture resistance, easy to clean, and also importantly fit into the interior of this application.

See the insoles

Tsіkavy design stele in the kitchen.

The stele in the kitchen is guilty of good mitis, as well as vitrimuvat high temperatures and resistance to water. Not a trace of vikoristovuvaty in this room porous pokrittya, and also easy to borrow. At apartments it is necessary to win such a cover, which is easy to renew, and also vitrimuvat the pressure of water, which can pour in the hour of flooding of the susid in the beast.

Design of a sagging rake stele in the kitchen.

The widest coverings in the kitchen are:

• Plastic steles;
• Gypsum plasterboard;
• Expanded polystyrene plates;
• Farbuvannya steli;
• Stucco stele;
• Pasting with tapestries;
• Tension steles.

View of the panel stele in the interior kitchen.

Plastic steles

Plastic stele in the kitchen from the images.

This variety of insole covers is one of the most optimal for the kitchen. Plastic rei miraculously endure the water, as well as good miyuyutsya. In our time, a wide range of different colors and configurations of this material, which allows you to choose the very option that will fit into the interior of your kitchen, are being promoted in our time. However, these constructions, as if they were others, may have their pluses and minuses.

A plastic stele made of built-in lamps.

1. It doesn’t matter how the surface is treated, which is why it is often vicorated in apartments with uneven beds;
2. Good to clean;
3. Shvidko vmontovuєtsya;
4. Appropriate for the installation of spotlights, as the remaining fates have become a trend for kitchen applications.

1. Є expensive, on vіdmіnu vіd gluing trellises or plasters;
2. In apartments with low stelae, the construction is given at least 6 cm, so for their installation a metal profile is used.

Plastic panels in the kitchen design.

For the installation of this structure with your own hands, you will need the following materials: The plastic panels themselves (their length and number of them lie in the area covered), a screwdriver, a stapler, screws, wooden slats or a metal profile, a hammer, a twist, a rusty one, a stainless steel one and olive.

For fixing plastic structures in front of the stele surface, it is not necessary, just like on the old stele there were trellises or farba taking them all the same. After the removal of old materials on the stele, the surface should be carefully covered with soil, it is necessary to protect the vine on the stele of flowers or fungal dentures. If there is a cream on the surface, there are abostika cracks between the wall and the stele, then it is necessary to cover them with putty.

Installing a plastic panel on a bed in the kitchen.

The next step is to fix the frame. For this shoulder, it is necessary to designate the lowest point of the stele cover, and for that, for the help of equal work, mark the mark along the entire perimeter. The opening of the rosette must go down no more than 3 cm, it is possible to troch less (to lie in the height of the stele) and to install the rails. The fastening of the laths is guilty, but in width and length no more than 50 cm, otherwise the plastic panels may sag. Before attaching plastic rails, it is necessary to complete all preparations for the installation of lighting lamps.

Plastic stele made of mirrored women in the kitchen.

Once the fixing is installed, it is possible to fix the installation of the plastic rails themselves, as they are fastened behind additional screws. Rey povinnі krіpitsya in parallel one to one. Places with the passage of sewer pipes, scorching or water supply are observed for the help of a budding knife or a hacksaw.

After the residual installation of the rest of the room, the next space for possible spotlights (as they are used by the interior of the kitchen), after them, install the lighting fixtures. The final stage of installing a plastic stele in the kitchen is the installation of skirting boards, which can be done in two ways, on rare flowers or self-tapping.

Gypsum plasterboard

The Danish type of stele construction may have a positive quality. Yogo can be prepared in different configurations with multiple tiers, as if to reinforce the modern interior of your kitchen.

Gypsum plasterboard covering on the stele in the kitchen.

However, there are a lot of pluses in this design, and there are also minuses:

1. Plasterboard stele to cover the road;
2. Installation with kіlkom equals is a laborious process;
3. May low heat;
4. Require retelnoї preparation of the base.

In front of the installation of this design, regardless of the number of rivniv (1 or more), the old stele cover should be thoroughly refinished, and itself should be degreased, tidy up the excess water, virivnyat yogo, and also abraded with a primer to uniquely remove fungal dentures.

After processing and bracing of the old coating, it is possible to repair the installation of the yak frame, so even with plastic panels, turn on the metal profiles. With a single-layer gypsum plasterboard profile, they are fixed on one equal layer, and with different bagator-vnevyh (2 and more) profiles, they are installed fallowly in the future stele.

Do-it-yourself kitchen design.

Gypsum board sheets are attached to the profile behind additional screws. After each month, the fixing is smeared and rubbed with putty. After the residual installation of the leaves, the surface can be pasted over with trellises, or furbished, fallow according to the style and interior of the kitchen. Most often, for this stellar covering, dots of lamps are installed, which can be installed after the completion of all work on the installation of drywall.

This cover is often used in kitchens with uneven steles, as a result of which the stele comes out perfectly even without sticks and crevices.

Expanded polystyrene plates

This type of bedding is less laborious in the installation process. To install such a stele with your own hands, you need: stove and special glue.

This kind of coverage can be a plus, so a minus. Before the first ones, the speed in the installation and economy is seen (the stench is not expensive). Up to the minus points of varto: combustibility, as well as change of color (when fatty vapors get on them).

Penopolistirolny plates on a stele in kitchen.

Before applying the slabs of foam polystyrene plates, they should be carefully cleaned from the old coating and treated with an antiseptic. If glue is applied to the back of the slab and applied to the wall, the robot in this situation can take you more than a few years. After gluing all the steles with the same glue, the plinths are glued, and the lamp is also installed.

Farbuvannya steli

This is one of the widest options for bedding in the kitchen. This type of coating is similar to whitewash, ale wine is practical and vikoristovuetsya itself for kitchens. Tsey kind of coverage is possible, like and more others, like pluses, so minuses.

Farbuvannya steli for the help of the sawer.

• You can cover the walls of vikoristannyam farbi independently, without going to the aid of fakhіvtsіv (economy);
• On the vіdmіnu vіd bіlёnogo, stela z farboi good miєtsya and vіn stіyky to vologia;
• Resistant to high temperatures.

• The Danish type of cover is not typical for longevity and yogo, shards and bruising periodically follow onovlyuvat;
• In apartments, as if the fires are periodically flooded, the farba can often break and crack. In this situation, the restoration of one of the steles is not practical, so it is necessary to replace and repair everything.
• In the course of the year, the stele is zabarvlene covering the stele begins to crackle and change the color, at the connection with the influx at new high temperatures, or the deposition of oily steam when cooked.

Before applying the special farbist, the surface should be carefully prepared. It is necessary for us to remove all the old coating (farba, putty or whitewash). After that, the surface should be treated with an antiseptic treatment and thoroughly covered with soil.

Farbuvannya steli in the kitchen in white color.

In this case, when farbuvanni stele, not all lighting fixtures can be vicarious, for example, dot lamps categorically do not fit to this type of covering.

Stucco stele

Restoration of steel in the kitchen for additional plaster.

Police plaster is also often vicorated for kitchens;

• Economical, like vitrati on materials;
• You can farbuvatsya;
• Curve with trellises;
• Virivnyuє surface;
• Don't burn.

• To cover the walls with plaster, it is necessary to hire a specialist (visiting the work);
• Nestiyka to vology;
• The year will require an update.

In front of the plastering of the stele, as for other types of coatings, next preparation. Take from new old materials, work with an antiseptic zasob, so that you can protect the fungus from fungus, and also smear with soil.

After carrying out the preparatory work with the first ball, it is necessary to apply the base plaster, let it dry (or two days) and then cover it with the finishing plaster. When covering with the final stage, farby is applied, which is how it is transferred, as well as gluing the insole skirting boards.

Stucco bedding in the kitchen.

Point lamps, which are often installed in kitchens, can be covered in this type, but only for understanding that the plaster is applied to drywall sheets, as if they were mounted in front of a metal profile.

Pasting with tapestries

Pasting with trellises the walls in the kitchen were victorious for our ancestors, but in the rest of the years such an option comes into the background, at the link with yoga minuses.

Minuses of pasting with tapestries:

• Pasting the steel is a laborious process and borrowing a lot of time, for a review, for example, for a farb;
• As your kitchen is often flooded by the beasts, such an option is guilty of drinking in the background. Because the stench will be seen right away, and it will be necessary to replace them;
• The trellises are independent in their lightness and road, may burn with power, which is not pleasant for the kitchen;
• At the link with hits on the stele of viparives, as well as fats in the preparation of їzhi, trellises begin to come in and diverge in sticks, so by the time you need to replace them.

Pasting tapestries on the stele in the kitchen.

However, not marveling at the impersonal negative qualities of pasting the trellises in the kitchen, the stench still stings with the millet of the commissaries, but it is due to this that:

• The stench may be fairly inexpensive, so that you need more trellis and glue to cover the stele;
• You can periodically miti (miyni trellises).

Before gluing the trellis, the stele should be cleaned and treated with a special antiseptic, after which you can boldly proceed to pasting. The final stage of work with trellises is gluing the plinth and installing a lamp (suspended).

Decor stele in the kitchen trellis.

Tension steles

The Danish view, covered with the remains of rock, is worthy of great popularity, not only for kitchens, but also for the whole house. Whose present-day look is stili zavdyaki, with a wide choice of colors, the building fit into any interior.

However, with the choice of this cover, there is a trace of nobility that only fakhivts can be installed in this room and it can be beaten with one of the expensive bed covers.

Stretch steles in the interior kitchen.

Pluses of stretch insoles:

• Vіn stіyky to dії vologia;
• building prihovati all nayavnі nedolіki on the stele;
• Good luck;
• I am ideally equal;
• Possible different options for installation;
• When the animal is flooded with waters, its kind of building stele will take all the water in you, get angry for the yak, you can pierce a sprat of small trees near different places.

Minuses of tension insoles:

• Dear;
• Vymagaє installation by specialists;
• During this installation, it is impossible to open the door for the installation of future lighting fittings and it is not possible to transfer them to another place;
• It is not recommended to vicorate in kitchens with low stelae, as with this installation, a few centimeters are taken from the surface, so that the kitchen is lowered.

There was a stretch stele in the kitchen.

As it has already been said before, such a cover for the construction of only fahivts, in which case the preparation of the bed cover is not as important as in the previous methods.

Before repairing in the kitchen, zokrema steli, it is necessary to carefully think over how to cover your interior as much as possible. Budіvelnі shops in our hour proponuyut their spozhivachevі mass of different materials for repair, yakі pomozhut virіshity nutriment, yak I lay better zrobity in the kitchen.

Video: Installing the stele in the kitchen