Do-it-yourself garden benches, best ideas
Mayuchi zamіsku dіlyanka or private budinok, obviously, you want not only to practice, but to enjoy the views and the results of your work. Steel that bench for a summer residence with your own hands to become a wonderful option for landscaping a garden.
Wooden lava with a back
Wooden lava will be an inexpensive and practical element to embellish the territory and accept the fine conduct of the house.
What do you need for a meeting
First of all, create lava, signify a misfortune of її arguing. It is better to put її near the tіnі trees or the vineyard. To prepare a garden bench, you will need: wooden boards of 30 mm zavtovshki and close to 120 zavshirshki. You can't do without wooden bars made of 40x40 mm peretina. It is necessary to fasten the boards between themselves with 50 mm screws. After a complete folding, it is possible to make a new lava, be it like farbs, like vikoristovuyutsya for the best work.
For work, you need a special set of tools, which, singsongly, is from the skin master:
- olive;
- plane;
- a hammer;
- roulette;
- twist;
- hacksaw for wood;
- chisel.
The process of preparing that armchair
To build a bench for a summer residence with your own hands, It is necessary to prepare chairs, which will be lava. We will designate the future height of the shop and the number of feet. Є zagalnopriynyati standards, which are recommended to be trimmed: the width of the seat can be close to pivmeter, the length of the back is up to 600 mm, the height of the backrest is 350-500 mm.
Mayuchi ready chairs, you can already sign up, you need some approximate materials for lava. Also, at that stage, it is determined what plan the shops will be: garden benches-transformers, portable, dug in, even if there is additional material to be deposited.
Following the parameters of the chair, you can easily mine lava. For the cob, work on the surface of the material, remove the notches. After that, look at the boards of the ones you need to expand. For the help of a jigsaw, you can twist the figured parts of the bench. Open for screws and fasten all the elements together.
You know you? So that the lava was not cluttered with the boards of that layer, you can varnish it with farboi. It is important to vikoristovuvat yakіsnu farba chi lacquer, even if stitched chi non-yakіsna production is more likely to harm the viroba..
How to install virib
Forgive the garden benches, after picking with your own hands, it’s too much to install. Even at the stage of creation of the chair, you were guilty, the shop will be stationary, otherwise it can be transferred. For any kind of mood, it is necessary to think about the constructions of lava. To do this, screw two beams to the front and back sides of the lava. In times of incompatibility, the material can be beaten with one beam, but it can also be installed transversely. After whom, dig lava into the ground, as if it was prepared for whom.
How to build a shop next to a tree, and what do you need for
A viable option would be to install a bench next to a tree. So you will forever enjoy the views of your garden from the shade and cold of the tree. It's easier just to buy a shop, ale make lava for the dacha with your own hands, and the next time you spend on it, you will be richly received.
Nasampered, it is necessary to choose a tree, for some kind of roztashovuvatime there is a shop. Once again, designate that a young tree is not for quiet purposes. In a different way, looking stupidly, in a different way, through the growth of the tree in the future, blame problems, and the tree just hangs a bench.
Important! Choose a tree of yakomoga comrades, even garden benches, crushed with your own hands on a tree, to look even more natural. It is not recommended to put lava near a fruit tree, for that fruit that falls off should look at and take care to sit on the bench.
Preparation of material and tool
Depending on the fact that the lava will constantly know just the sky, it is necessary to choose the right type of wood, so that it will constantly succumb to the influx of the superfluous middle. For such a shop, an ideal timber would be oak, pine, teak. The skin detail of the future lavi needs to be sanded and treated with an antiseptic rosin, special oil or seepage for wood. Special respect should be given to the end sides of the boards, the shards on them are the most affected. After the total seepage of the tree, it can stand for at least 15 years.
It is important to prepare all the necessary daily tools and materials. To set up a bench next to a tree, you need:
- drill or screwdriver;
- hacksaw, circular saw or electric jigsaw;
- emery paper or a grinding machine;
- seepage for wood;
- boards for support stands;
- boards for bearing parts;
- self-tapping and bolt;
- if you want, then prepare farba chi lacquer for finishing work.
Benches and benches for dachas can be made a standard template, which can be used to prepare your own bench. For example, to build a square bench next to a tree, seat height can be 50 cm(feet reach the ground), and the seat will be 45-50 cm of the crown.
Bench storage
Nasampered, it is necessary to pick up the support posts. You will need chotiri and on the skin you will need 4 dowels of 10 cm of lace, 60 dowels and 2 dowels of 40 cm each. It is necessary to creak with screws. After that, take 4 doses for the skin section. If the tovshchina of the stovbur is about 160 cm in girth, you will need to deprive the crown of the crown by 15 cm, which means that the bottom of the board of the inner square is more than one meter. Vyhodyachi z tsikh rozmiriv, the other plank may be 127 cm, the third - 154. The found plank may be 180 cm.
It is necessary to fasten the short boards with self-tapping screws or bolts to the supporting stіyk, closing a gap of 2 cm at that, and attach the foot planks in the same order.
You know you? If you don’t fill the gap between the boards, the water will not flow freely to the ground, through which the bench will rot more often. Also, the gaps to ease the process of picking up leaves and smіtya from the shops. The final stage of arranging lavi is the finishing of the shop with lacquer or farboi. If there is a need, then re-sand the shortness on the decks.
How to build a transformer shop with your own hands
Bench-transformer - far away practicality and beauty. The very showpieces are especially valued at a dacha or a private booth, children's space is often in short supply. Stacked lava takes only a few months. With a light stroke of the hand, you can take away the splendid lava, the folding country style with lavas.
What do you need for a garden table
For the construction of such a shop, a bar is used, more often than a vicorist is clear, beech, oak or birch.
Schob zmaistruvati її, need:
- hacksaw;
- roulette;
- sandpaper;
- chisel;
- bolt that nut;
- drill.
Detailed instructions for preparation
The bench-transformer dacha is folded from the benches with a back, the back is transformed into a style. Benches can be made of different widths. All the details need to be polished well. Instructions for preparing the transmission:
Now at your disposal lava-transformer with a back, crushed with your own hands. You only need to cover up your work, so that it doesn’t come out under the flood of natural factors. Kramnitsa z decks - simple and unique design
The frame of the deck is strongly perturbed by analogues from other materials. You will lose your functionality, and inspire practicality. As you know, the name, the basis for the shop is the whole deck.
Necessary tool
To make lava from the deck, it is necessary to prepare:
- chainsaw;
- juice;
- olive;
- farbu chi lacquer;
- compass and staple.
- a deck is needed for the base;
- additional decks;
- doshka (back);
- stovpchiki.
List of diy
The principle of robotics is even simpler. We are appointed to the place where lava stands. Clear the main deck from knots and groves. Designate a month, where they will be robbed and drunk.
Important! Good to close the deck in front of the robot with a chainsaw. It is necessary to complete the whole work more carefully, Even if you have already filed a claim, you will not be able to continue the work with the same deck. The decks of the smaller rosemary will vicorate like a support for a shop. In order to fix the whole structure in a good way, to dig them down. If all the components are ready, install them on the plate. To fix the supports from the seats, screw the screws. After that, attach the back. We fasten the back to the stovpchikiv, and then to the supports of the bench.
Vicorist given instructions, you can independently sporudite from the decks of the shop and show їх sim'ї.
Chi bula tsia article brown?
Ta nі
